Stocked Special Magnetic Particle Clutches

Concentric style - Input shaft & output shaft on same side.

Special designs, available from stock.

Machine: 35mm Photographic Film Splicer Manufacturer: Gretag Placid part number: 15CC2-24-1F OEM part number: 50-350706-001 Coil: 24 volts, Resistance: 205 ohms Case O.D. = 1.437 " Application - Apply torque to 35mm film bobbin, to determine the direction the film is wound inside the can.

Machine: Docu-Mate II, Microfilm Machine Manufacturer: Terminal Data Corp. (TDC) Placid part number: CC30P-10-1 OEM part number: 212023 Coil: 10 volts, Resistance: 5 ohms Case O.D. = 3-3/4 " 2 clutches per machine 1 brake per machine, Placid Ind. p/n B25P-10-1, TDC p/n 212022, not shown Application - Engages motor to belt that transports original paper document.

Machine: Turret-style rewinder Manufacturer: CTC International, (formerly Compensating Tension Control) Placid part number: CC60P-CTC OEM part number: P1068-19 Coil: 90 volts, Resistance: 540 ohms Case O.D. = 3.50 " 5 clutches per machine Special low torque version, CC60-CTC-B, for small rolls & light tension, also available. Application - Machine winds web onto smaller rolls. The clutch drives the small roll, controlling tension.

Left: Clutch CC60-CTC-B Special low torque, high RPM version Rated torque = 30 lb.-in. Right: Clutch CC60P-90-CTC Standard version Rated torque = 60 lb.-in.